Replace the rear shock absorbers Lanos, Sens, Chance, Nexia TriallyIn this video, we will look at how you can install, change, or replace yourself the rear shock absorbers of the firm Trially on Lanos, Sens, Chance, Nexia and other similar cars.Before you install the shock absorbers, you must buy the bolts and nuts in advance for attaching the shock absorbers. Threadedly fasten the shock absorber with a WD-skin or liquid key. Allow time for the lubricant to penetrate into the threaded connection, then tighten the nut(connection of the shock absorber with the suspension in the house) or unscrew the bolt (if the shock absorber is attached to the beam itself). Then, in the trunk of the car, remove the plugs and unleash the connection of the shock absorber with the body. To do this, use one key to hold the nose of the shock absorber stem, another to unscrew the nut. Remove the plate and rubber pad from the shock absorber rod. Now from the bottom of the car, you can pull the shock absorber from the eye. Install new shock absorber in the car in reverse order. But to pump or not decide each owner on their own. We already talked about this in a previous video.